More updates, GPIO pins!
This commit is contained in:
Josh Mudge
parent
16418cd5e5
commit
48b8c8b8f2
|
|
@ -0,0 +1,68 @@
|
||||||
|
I setup wiring on the Orange Pi but was unable to access it through a bridged internet interface.
|
||||||
|
|
||||||
|
I need another ethernet cable, I'm pausing at 11:05AM.
|
||||||
|
|
||||||
|
Resumed at 11:23 with ethernet cable, `arp` isn't giving me anything on where the Pi is.
|
||||||
|
|
||||||
|
You must plug in the ethernet to the Pi after plugging in power. Fing is a good network discovery tool. He ran fing twice before and after we plugged in the pi and ran diff on the two captures.
|
||||||
|
|
||||||
|
AJ tested using a USB cable with exposed cables, Black = ground Red = multiverse
|
||||||
|
|
||||||
|
He hooked them to the board to a resistor to the LED and it worked.
|
||||||
|
|
||||||
|
Green = Black Yellow = Red
|
||||||
|
|
||||||
|
We wired it up with pin 6 (ground and pin 2 VCC3.3V)
|
||||||
|
|
||||||
|
Check the GPIOs in the kernel
|
||||||
|
|
||||||
|
/sys/gpio/
|
||||||
|
|
||||||
|
Find a GPIO already turned on.
|
||||||
|
|
||||||
|
I want to setup rocket.chat. I followed these instructions and modified them for the Raspberry Pi https://rocket.chat/docs/installation/manual-installation/ubuntu/
|
||||||
|
|
||||||
|
Install Node & NPM: `curl -fsSL bit.ly/node-installer | bash -s -- --no-dev-deps`
|
||||||
|
|
||||||
|
Download: `wget https://releases.rocket.chat/latest/download`
|
||||||
|
|
||||||
|
Decompress: `tar -xvzf download`
|
||||||
|
|
||||||
|
```
|
||||||
|
cd Rocket.Chat/programs/server
|
||||||
|
npm install phantomjs
|
||||||
|
npm install
|
||||||
|
cd ..
|
||||||
|
sudo ROOT_URL=http://your-host-name.com-as-accessed-from-internet/ \
|
||||||
|
MONGO_URL=mongodb://localhost:27017/rocketchat \
|
||||||
|
PORT=80 \
|
||||||
|
node main.js
|
||||||
|
```
|
||||||
|
|
||||||
|
Install MongoDB:
|
||||||
|
|
||||||
|
```
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get install -y mongodb curl graphicsmagick
|
||||||
|
```
|
||||||
|
|
||||||
|
I had to deal with this issue on my Raspberry Pi:
|
||||||
|
|
||||||
|
`gpg: failed to start the dirmngr '/usr/bin/dirmngr': No such file or directory`
|
||||||
|
|
||||||
|
`sudo apt-get install dirmngr`
|
||||||
|
`sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 7F0CEB10`
|
||||||
|
|
||||||
|
# Install Snap on Raspi
|
||||||
|
|
||||||
|
`echo "deb https://mm.gravedo.de/raspbian/ jessie main" > /etc/apt/sources.list.d/snapd.list`
|
||||||
|
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv B9465B841412DB3B
|
||||||
|
apt update
|
||||||
|
apt install -y snapd
|
||||||
|
sudo snap install rocketchat-server
|
||||||
|
sudo systemctl restart snap.rocketchat-server.rocketchat-mongo.service
|
||||||
|
|
||||||
|
|
||||||
|
# Haraka on ORANGE_PI
|
||||||
|
|
||||||
|
npm install -g Haraka
|
||||||
|
|
@ -2,8 +2,6 @@ Search terms: printout, wiring diagram.
|
||||||
|
|
||||||
Actual diagram:
|
Actual diagram:
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
People who have done it: https://www.youtube.com/watch?v=KF1IJvINjYE
|
People who have done it: https://www.youtube.com/watch?v=KF1IJvINjYE
|
||||||
https://www.youtube.com/watch?v=4zICevDOhr8
|
https://www.youtube.com/watch?v=4zICevDOhr8
|
||||||
|
|
||||||
|
|
@ -57,3 +55,43 @@ Adjust device default LEDs.
|
||||||
Raspi example of LED lighting:
|
Raspi example of LED lighting:
|
||||||
|
|
||||||
https://thepihut.com/blogs/raspberry-pi-tutorials/27968772-turning-on-an-led-with-your-raspberry-pis-gpio-pins
|
https://thepihut.com/blogs/raspberry-pi-tutorials/27968772-turning-on-an-led-with-your-raspberry-pis-gpio-pins
|
||||||
|
|
||||||
|
|
||||||
|
Orange Pi USB process: https://diyprojects.io/orange-pi-onelite-tutorial-use-gpio-python-pinouts/
|
||||||
|
|
||||||
|
sudo apt-get update
|
||||||
|
sudo apt-get upgrade -y
|
||||||
|
sudo apt-get install python-dev -y
|
||||||
|
sudo apt-get install python-pip -y
|
||||||
|
sudo apt-get install -y python-setuptools
|
||||||
|
pip install wheel
|
||||||
|
pip install pyA20
|
||||||
|
|
||||||
|
git clone https://github.com/duxingkei33/orangepi_PC_gpio_pyH3
|
||||||
|
|
||||||
|
|
||||||
|
This didn't work, BUT, the below did:
|
||||||
|
|
||||||
|
The general proceeding is described in https://linux-sunxi.org/GPIO
|
||||||
|
|
||||||
|
The GPIO pins are accessed via the sysfs file system. For enabling a specific pin it has to be exported into /sys/class/gpio/export
|
||||||
|
|
||||||
|
for pin PA1 the command would be echo 1 > sys/class/gpio/export. The pin number is calculated by the following formula :
|
||||||
|
|
||||||
|
(position of letter in alphabet - 1) * 32 + pin number
|
||||||
|
|
||||||
|
PA1 has pin number ('A' is the 1st letter ) 1, PB2 has pin number 34 ('B' is 2nd letter ), PG7 has pin number 199( 'G' is 7th letter (7-1) * 32+7=199 )
|
||||||
|
|
||||||
|
the positions on the physical header are different again, cf. the graphic below
|
||||||
|
|
||||||
|
so for enabling PG7 that is pin 40 on the physical header can be used
|
||||||
|
(# echo "out" >/sys/class/gpio/gpio5/direction first)
|
||||||
|
echo 199 > sys/class/gpio/export
|
||||||
|
|
||||||
|
Then you can run `echo "1" >/sys/class/gpio/gpio2/value` to turn it on and `echo "0" >/sys/class/gpio/gpio2/value` to turn it off.
|
||||||
|
|
||||||
|
https://stackoverflow.com/questions/46463724/accessing-gpio-on-orangepi-pc-plus-h3-on-armbian-3-4-113-and-newer
|
||||||
|
|
||||||
|
https://diyprojects.io/orange-pi-onelite-tutorial-use-gpio-python-pinouts/
|
||||||
|
|
||||||
|
https://forum.armbian.com/topic/1471-solved-difficulty-accessing-gpio-via-the-sunxi-gpio-export-interface/
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue