josh/proxmox-scripts
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update notes in the reduce-ssh-writes.sh script.

Browse Source
This commit is contained in:
Josh Mudge 2025-05-14 09:59:56 +00:00
parent cf41d53e2e
commit 9118a69996
1 changed files with 12 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Proxmox/reduce-ssd-writes.sh
View File

@ -1,31 +1,33 @@
#!/usr/bin/env bash
# This has not been tested, use at your own risk.
# Do not use in production, or on hard drives. This is only for consumer SSDs in a home lab.
# Changes recommended for reducing writes on SSDs, this is generally all bad for hard drives: https://serverfault.com/questions/950794/how-to-limit-zfs-writes-on-nvme-ssd-in-raid1-to-avoid-rapid-disk-wear/950896#950896
# I recommend running these commands one-by-one once you understand what they do. Do not run a command you don't understand or you may experience catastrophic data loss.
# These changes are recommended for reducing writes on consumer SSDs: https://serverfault.com/questions/950794/how-to-limit-zfs-writes-on-nvme-ssd-in-raid1-to-avoid-rapid-disk-wear/950896#950896
# This may cause data loss and increase other resource usage (like CPU, etc).
# This script assumes your zfs pool is rpool.
# This script assumes your zfs pool is rpool, you may need to change that name when running these commands.
echo "Enabling a variety of settings to reduce writes on SSDs. This may cause data loss and increase the usage of other resources like CPU. DO NOT run this on a hard drive. Hit Ctrl + C to cancel."
sleep 10
echo "starting changes"
echo 'options zfs zfs_txg_timeout=30' > /etc/modprobe.d/zfs.conf # Set txg_timeout to 30 seconds. This introduces a higher risk of data loss.
zfs set atime=off rpool # Turn off atime.
zfs set logbias=throughput rpool # Change logbias to throughput. Don't do this if you have a custom log device for your pool. You'll want latency for that.
echo 'options zfs zfs_txg_timeout=30' > /etc/modprobe.d/zfs.conf # Set txg_timeout to 30 seconds. This introduces a higher risk of data loss because it syncs to disk every 30 seconds instead of 5 seconds.
zfs set atime=off rpool # Turn off atime (updates to file time data that aren't as important)
zfs set logbias=throughput rpool # Change logbias to throughput. Don't do this if you have a custom log device for your pool. If you later decide to do so, you'll need to change this setting back to latency
zfs set compression=lz4 rpool # Set compression to lz4 instead of the older LZJB.
zfs set recordsize=16K rpool # This works better with lots of little writes, and seems to be recommended for VMs on SSDs unless your workload is many large writes.
zfs set recordsize=16K rpool # This works better with lots of little writes, and seems to be recommended for VMs on SSDs unless your workload is many large writes. If you do a lot of large writes, do not run this command, leave the recordsize as default.
# ZFS seems to recommend smaller recordsizes for VMs if you're running on SSDs in general depending on the workload:
# ZFS seems to recommend smaller recordsizes for the VM ZFS pool if you're running on SSDs in general depending on the workload:
# https://openzfs.github.io/openzfs-docs/Performance%20and%20Tuning/Workload%20Tuning.html#virtual-machines
# https://openzfs.github.io/openzfs-docs/Performance%20and%20Tuning/Workload%20Tuning.html#zvol-volblocksize
# 16K: https://serverfault.com/a/1120640
echo "This is the ashift, this should be 12:"
echo "This is the ashift value for your ZFS pools, this should be 12:"
zpool get all | grep ashift
echo "And trim should be enabled:"
echo "And this should tell you whether trim is enabled, it should be:"
systemctl status fstrim.timer